Realsense D455f flicher with capture LED
Good morning,
I'm doing a project using the Realsense D455f to analyze the color of LED lights, but I'm having problems. For a good analysis I use a very low exposure but the capture in the LED area flickers.
I've already tested it with different fps but it's not stable.
My doubt is because this project worked correctly with the Realsense D415 camera and it doesn't work with the D455f.
I didn't want to switch to the D415 because I needed a camera with an infrared filter to eliminate reflections.
Thanks.
-
Hi Tvasco90 As your project does not flicker when using the D415 camera model but does with a D455f, I would first recommend setting the D455f's IR emitter to Always On. The D415's projector component is always on, whilst on other RealSense camera models it pulses in line with exposure. Setting the projector to Always On on those cameras enables them to emulate the D415 projector's always-on behaviour.
Please sign in to leave a comment.
Comments
1 comment