I've just received my L515 (yesterday) and plugged it on my PC. After installing realsense viewer, upgrading the lidar, just started the depth view, and it worked for a while (10 minutes or so) and I played with some views/parameters.
Then, I started receiving this info "no frames received" for depth sensor or infrared camera. RGB camera works normally, also motion detector, and I get info from L515, such as temperature, but simply I get no depth/ir image. When I start depth stream, I get this error:
Description: Fatal error occurred (16)
I've changed usb port, cable, tried some hardware reset and even tested my 435i camera to see if there was any issue.
Anyway, I'm guessing this is some kind of hardware error - I've noticed that the laser emitter is not turning on. Any suggestions on what to do?
Please sign in to leave a comment.