Dhongfhel
- Total activity 17
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 1
- Subscriptions 6
Activity overview
Latest activity by Dhongfhel-
Dhongfhel created a post,
How to properly configure D405 for optimal depth performance within 10cm to 25cm range?
I already got the threshold and color filters working to get a good depth image but I was wondering if can also use depth clamp min/max and depth units to improve more. Please advise.
-
Dhongfhel commented,
Hi MartyG Thank you for this helpful information. I can see its width decreases as I move the camera farther. But yeah, I need it closer to the object that's why I picked D405 for this purpose. I g...
-
Dhongfhel created a post,
0 depth at the left of depth image even after performing alignment
I'm using D405 and opencv C++. Resolution is 848 x 480. The top image is the color image and the bottom image is the colorized depth image. The foreground object in the images seemed aligned after ...
-
Dhongfhel commented,
Great. Thanks!
-
Dhongfhel commented,
So you also don't recommend me doing even an on-chip self calibration to it?
-
Dhongfhel created a post,
Calibration for D405
Hi Would you recommend tare calibration for D405?
-
Dhongfhel commented,
It works! Thank you very much.
-
Dhongfhel created a post,
-
Dhongfhel created a post,
Will the MATLAB wrapper work in 32-bit MATLAB versions like 2015b in Windows?
The information in github says it uses Matlab R2017b but did not specify which MATLAB version the wrapper can't work. I have it working in 2019a but trying to have it work in 2015b due to project l...
-
Dhongfhel created a post,
[Newbie] How to install MATLAB wrapper in Macbook Pro to connect to my D435 through MATLAB
I'm a newbie here. I just would like to know how to install MATLAB wrapper so I can connect to my D435 depth cam in MATLAB in my MAC. I'm using MATLAB R2018b. Thanks.