MartyG
- Total activity 1820
- Last activity
- Member since
- Following 0 users
- Followed by 1 user
- Votes 0
- Subscriptions 571
Comments
Votes on activity by MartyG-
Hi Fpelegri. Unplugging the camera from the USB port will close any currently open pipeline. When the camera is re-inserted into the USB port, the default configuration of the particular camera mo...
-
The Device Manager does not look correct. Both of the cameras should have their two drivers (Depth and RGB) listed under the Fotocamere category. Your Fotocamere should look like the image below,...
-
Hi Sunardi A response to your question has been posted at the link below. https://support.intelrealsense.com/hc/en-us/community/posts/6657795804947/comments/7031677325459 Whilst it may be expect...
-
Hi Sunardi Yes, you can apply physical optical filter products over the front glass of the camera. Past examples of mounting the filters include using a 3D printed housing (see an infrared filter...
-
Hi Yehonatan 1. If depth auto-exposure is enabled then the exposure value is not updated, so you can instead obtain the 'real' depth exposure value from the camera metadata. References for retr...
-
That is very understandable. Thanks very much for the update!
-
Hi Richard Shea The RealSense SDK 2.0 software is not compatible with the F455 facial authentication device. It has its own dedicated SDK at the link below. https://github.com/IntelRealSense/RealS...
-
Hi Nati Farkash In the RealSense SDK's rs-callback C++ example program at the link below, if the camera has an IMU then both gyro and accelerometer are enabled by default. https://github.com/Intel...
-
Tests determined that a pen was invisible at 30 cm unless depth resolution was increased to 1280x720, at which point the outline of the pen became visible. The depth read at 30 cm (300 mm) was aro...
-
Hi Samiulextreem The ideal depth sensing range of the D405 model is 7 cm to 50 cm. So it is capable of being used for depth sensing at 30 cm from the chilli. Although I did not have green chill...