A Dhesi2
- Total activity 37
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 6
Activity overview
Latest activity by A Dhesi2-
A Dhesi2 commented,
I have completed the instructions for https://github.com/MIT-SPARK/Kimera-Semantics and recieved the following: Are all three modules from https://github.com/mit-spark/kimera required to run this?
-
A Dhesi2 commented,
yes and a continuation of https://support.intelrealsense.com/hc/en-us/community/posts/360050988973--WARN-No-RealSense-devices-were-found-
-
A Dhesi2 commented,
I have tried this and still get the same error
-
A Dhesi2 created a post,
D435i SLAM on Raspbian [rviz-7] process has died
I have obtained all four components for SLAM and rtabmap but when i run roslaunch realsense2_camera opensource_tracking.launch I get a single red error saying rviz has died. I get no other errors
-
A Dhesi2 created a post,
I want to run rs-dnn from the sdk code examples
To run rs-dnn I needed openCV so I got it using https://docs.opencv.org/master/d7/d9f/tutorial_linux_install.html Then i needed the wrapper for OpenCV so I used this site https://github.com/IntelRe...
-
A Dhesi2 commented,
I tried setting SLAM up on Ubuntu mate I think around a week ago and I can confirm I also got to this stage and also got these errors. I just went back to setting it up on raspbian again. These err...
-
A Dhesi2 commented,
what should i do about the roslaunch realsense2_camera opensource_tracking.launch enable_gyro:=true enable_accel:=true error that i get. Its not captured on the screenshot but the rviz initialisati...
-
A Dhesi2 commented,
When running roslaunch realsense2_camera opensource_tracking.launch enable_gyro:=true enable_accel:=true I get and when running roslaunch realsense2_camera rs_camera.launch enable_gyro:=true enable...
-
A Dhesi2 commented,
Akshay Ulavan I followed the instructions from the acrobotics video guide (https://www.youtube.com/watch?v=LBIBUntnxp8). I copied and pasted the instructions from his written guide (https://github....
-
A Dhesi2 commented,
Thank you Marty I'm very grateful for this help. Where I was going wrong was not obtaining the ROS wrapper properly, I have it now and have completed the three steps: 1. Install librealsense. (usi...