Stevew

  • Total activity 41
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 0 users
  • Votes 2
  • Subscriptions 13

Activity overview

Latest activity by Stevew
  • Stevew commented,

    Quick Note...I was concerned about heat.It appears the 435 shouldn't exceed 85ºCWe are operating at about 36.9ºC

  • Stevew created a post,

    435 Error Over Time at 90fps

    With a diagnostic tool running, I've allowed the 435 cameras to run overnight.At the 4hr mark, the errors were nominal.Over time, were seeing the Critical Frame Drops start to add up dramatically.(...

  • Stevew commented,

    Thank you MartyG !Could you tell meOr can you point me to the version documentationAre there any advantages to us to move to a newer SDK (beyond 2.55.1)) ??(considering we will likely be sticking w...

  • Stevew created a post,

    Should we update Firmware?

    General question.We've been using the 435 for several years now,.We locked into FW v5.13.00.50  during development.(newer FW versions require adoption of a new SDK)Looking at newer updates in firmw...

  • Stevew created a post,

    435 USB 3.0 and Static

    Noticing, especially this time of year, a lot of static related issues.We use these cameras exclusively with Windows PCs.In high static environments, the Cameras disconnect from the PCs.They won't ...

  • Stevew created a post,

    435 Calibration Stability

    When we receive a shipment of cameras, we test their calibration to make sure they are within our operating spec.If necessary, we do a quick calibration on them...I've seen some returns lately, and...

  • Stevew created a post,

    Adding Additional IR to the Scene, can it be helpful?

    Our team has been sending out supplementary IR light since our product release.(It's never been explained well, and I've always considered it witchcraft.  I've no evidence it's ever helped.) Today ...

  • Stevew created a post,

    FOV vs. Output Resolution

    I'm trying to rectify something in my mind, I'm sure is simple.I'm not a programmer, I don't have experience with the SDKLooking at the 455 (depth) Field of View:  3:2 Output Resolution: 16:9 How...

  • Stevew commented,

    I agree...and my original concerns don't seem to be an issue. At this point, I only mention as this error occurs in the RealSense Software (outside of our project) I've updated our team...We can cl...

  • Stevew commented,

    I updated to 5.14 from the suggested directory.Upon restarting RealSense software (v: 2.49.0.3474)...I immediately get the Auto Gain Limit Error(Restored defaults > no improvement)I updated back do...